It is a type of assembly in which the lower part of the integral pillar is removed (tear), and when inserted into the pillar and rotated, the nut presses the rubber to contract the space in the pillar and complete the assembly. * Please contact the noiseless inline hospital wheel separately.
Item
FC-Type/3inch Wheel 1set
Product code
FC/3
Type
Compression type
material
Urethane
Overall Height
100 mm
Allowable load
320 kg
Special note
Ring-Type Improvement
1 SET Configuration
Rotation2/ Rotary Brake2
Item
FC-Type/4inch Wheel 1set
Product code
FC/4
Type
Compression type
material
Urethane
Overall Height
120 mm
Allowable load
320 kg
Special note
Ring-Type Improvement
1 SET Configuration
Rotation2/ Rotary Brake2
Item
FC-Type/5inch Wheel 1set
Product code
FC/5
Type
Compression type
material
Urethane
Overall Height
150 mm
Allowable load
320 kg
Special note
Ring-Type Improvement
1 SET Configuration
Rotation2/ Rotary Brake2
FC-Type ESD Wheel (FC-Caster)
When the Integral-Type Pillar is removed and the type is inserted into the Pillar and rotated, the nut presses the rubber to contract the space inside the Pillar and the assembly is complete. The wheel ball was changed to exclusive use when ordering ESD and shipped.
Item
FC-Type/Static Control/3inch Wheel 1set
Product code
FC/ESD/3
Type
Compression type
material
Urethane
Overall Height
100 mm
Allowable load
100 kg
Special note
Ring-Type Improvement
1 SET Configuration
Rotation2/ Rotary Brake2
Item
FC-Type/Static Control/4inch Wheel 1set
Product code
FC/ESD/4
Type
Compression type
material
Urethane
Overall Height
120 mm
Allowable load
100 kg
Special note
Ring-Type Improvement
1 SET Configuration
Rotation2/ Rotary Brake2
Item
FC-Type/Static Control/5inch Wheel 1set
Product code
FC/ESD/5
Type
Compression type
material
Urethane
Overall Height
150 mm
Allowable load
100 kg
Special note
Ring-Type Improvement
1 SET Configuration
Rotation2/ Rotary Brake2
How to assemble FC-Type Wheel
- Insert the Wheel accessory into the pipe and rotate it to the right, tightening the nut and shrinking the rubber.
- The shrunk rubber causes the Pillar interior space to expand and tighten strongly.
- For hospital wheels such as GDS series and in-line noiselessness, please contact us separately
M16Type Wheel
M16 Bolt-Type Wheel (BC-Caster)
It is a type that is assembled under the Separation-type Pillar, and it is a Bolt-Type that is easy to assemble and replace. Optimized for segregation type Pillar. *Integral-Type Pillar is not available
Item
Bolt-Type/2inch Wheel 1set
Product code
BC/2
Type
3/8 Bolt
material
Urethane
Overall Height
65 mm
Allowable load
100 kg
Special note
3/8 with the same height as Bolt
1 SET Configuration
Rotation2/ Rotary Brake2
Item
Bolt-Type/3inch Wheel 1set
Product code
BC/3
Type
M16 Bolt
material
Urethane
Overall Height
100 mm
Allowable load
100 kg
Special note
M16 include nut
1 SET Configuration
Rotation2/ Rotary Brake2
Item
Bolt-Type/4inch Wheel 1set
Product code
BC/4
Type
M16 Bolt
material
Urethane
Overall Height
120 mm
Allowable load
100 kg
Special note
M16 include nut
1 SET Configuration
Rotation2/ Rotary Brake2
Item
Bolt-Type/5inch Wheel 1set
Product code
BC/5
Type
M16 Bolt
material
Urethane
Overall Height
150 mm
Allowable load
100 kg
Special note
M16 include nut
1 SET Configuration
Rotation2/ Rotary Brake2
M16 Bolt-Type ESD Wheel (BC-Caster)
It is a type that is assembled under the Separation-type Pillar, and it is a Bolt-Type that is easy to assemble and replace. Optimized for segregation type Pillar. Integral-Type Pillar is not available
Item
Bolt-Type/3inch Wheel 1set
Product code
BC//ESD/3
Type
M16 Bolt
material
Urethane
Overall Height
100 mm
Allowable load
100 kg
Special note
M16 include nut
1 SET Configuration
Rotation2/ Rotary Brake2
Item
Bolt-Type/4inch Wheel 1set
Product code
BC//ESD/4
Type
M16 Bolt
material
Urethane
Overall Height
120 mm
Allowable load
100 kg
Special note
M16 include nut
1 SET Configuration
Rotation2/ Rotary Brake2
Item
Bolt-Type/5inch Wheel 1set
Product code
BC//ESD/5
Type
M16 Bolt
material
Urethane
Overall Height
150 mm
Allowable load
100 kg
Special note
M16 include nut
1 SET Configuration
Rotation2/ Rotary Brake2
How to assemble M16 Type
- Easy to assemble and remove.
- Basically, nuts are shipped with M16 nuts inserted into the pipes in the Pillar.
- If you contact us in advance when using ESD material, we insert ESD material nuts and send them.
Ring-Type Wheel
The Ring-Type Wheel is a type that assembles with the lower part of the Pillar removed, and the Integral-Type Pillar Separation-type Pillar Compatible with all Metal-rack Pillars. ESD static control Wheel has a separate inquiry.
Item
Ring-Type/3inch Wheel 1set
Product code
RC/3
Type
Ring-Type
material
Urethane
Overall Height
100 mm
Allowable load
1SET 320kg
Special note
Integral-Type,Separation-type All compatible
1 SET Configuration
Rotation2/ Rotary Brake2
Item
Ring-Type/5inch Wheel 1set
Product code
RC/5
Type
Ring-Type
material
Urethane
Overall Height
150 mm
Allowable load
1SET 320kg
Special note
Integral-Type,Separation-type All compatible
1 SET Configuration
Rotation2/ Rotary Brake2
Various Accessory
Plastic Sleeves
Including default when purchasing Shelf 1sheet = Using 8 PCS It can be assembled to the scale of the Pillar at 1 inch (25.4) intervals. Every five scales is double-coded for consistent for assembly. * All sizes applicable
ESD Sleeves
It is a separate purchase item, and the plastic sleeve can be surface-treated with plating to use it for ESD purposes. * All sizes applicable
Ledge
After the Shelf assembly is completed, it can be inserted into the front, side, and back to prevent things from falling. * All sizes applicable
snake frame
After the Shelf assembly is completed, it can be inserted into the front, side, and back to prevent things from falling. * All sizes applicable
S-Hook
Assembling Shelf without Pillar as shown in the picture below * Single Size
Post Clamps
Combine two or more pipes into one. * Single Size
Circular Height Bolt
3/8 in manufactured height leveler
Divider
You can store it separately with a divider
Short Handle
The short handle can be adjusted at 25.4 mm intervals using a scale processed on the Pillar. * All sizes applicable
first Handle
The primary handle is basically an integral part of the handle and column, usually assembled from the bottom, but the Metal-rack with the primary and secondary handles should be assembled from the top. The primary and secondary handles can be assembled on both sides. * All sizes applicable
Secondary Handle
The secondary handle is basically an integral part of the handle and column, usually assembled from the bottom, but the Metal-rack with the primary and secondary handles should be assembled from the top. The primary and secondary handles can be assembled on both sides. * All sizes applicable
The Pillar connection bracket, which was added due to the decrease in the volume and assemblability of the primary and secondary handles, is a structure that assembles the primary and secondary handles additionally after the assembly is completed with a regular Pillar instead of a handle type. The volume will be reduced when the package is sent. The bracket connection is Insert into the column and assembly with a hex wrench.